Mine does have an insulated base, and I am able to use it across the full band.
Pix on my web site: www.aa1k.us
73/Jon AA1K
At 12:44 PM 9/11/04, you wrote:
>>Full-size 1/4 wave with Rohn 25 -- about 11 inches on a face -- is about 128
>>feet tall. Your tower should be pretty close to that, maybe slightly taller.
>>Common method is to put up 120 feet of tower and then make the remainder a
>>piece of aluminum tubing clamped to the tower, and adjustable up/down to
>>resonate the tower.Fastening with a couple of hose clamps will work.
>>
>>My Rohn 25 for 160 is only 100 feet, and I have a small 6-meter yagi on top
>>that brings it into resonance on 160.
>
>
>Use a base insulator with the tower, and with series feed it takes only a
>simple L-network to make it match perfectly at any frequency. Mine is 127'
>tall, with 120 quarter-wave radials, and works the entire band 1800-2000 kHz.
>
>Don K4KYV
>
>_________________________________________________________________
>Don?t just search. Find. Check out the new MSN Search!
>http://search.msn.click-url.com/go/onm00200636ave/direct/01/
>
>_______________________________________________
>Topband mailing list
>Topband@contesting.com
>http://lists.contesting.com/mailman/listinfo/topband
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|