hello Beverage experts,
when feeding a Beverage the feedline cannot always be directed away from the
feedpoint, but has to be guided along (or even under) parts of the actual
Beverage...
as a cannot model a "common mode wire" on the ground with my EZNEC (NEC-2),
I wonder if anybody will be able to comment on the effect on the
pattern/gain of a Beverage with the feedline partly (or entirely) under (or
close to) the wire...
regards
Uli, DJ2YA
****************************************************************
* Ulrich Weiss, Am Birkenstrauch 15, D-57334 Bad Laasphe, Tel.:
+49/2752/6462 *
****************************************************************
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|