To: | topband@contesting.com |
---|---|
Subject: | Topband: 160m noise |
From: | Bill Tippett <btippett@alum.mit.edu> |
Date: | Tue, 09 Nov 2004 07:02:44 -0500 |
List-post: | <mailto:topband@contesting.com> |
Ni6T wrote: >I am also hearing that many new computer systems have power supplies in which the line filter component locations on the board are jumpered and that lower-rated, cheaper parts--such as lower-current rectifiers-- are being substituted for beefier parts. These computers are both radiating noise and failing at a high rate. Gee, what a surprise! I recently had first-hand experience with this. When TX9 started up on Topband on October 16, I had an S8 birdie exactly on his frequency 1826.5. I don't have very many close neighbors, but do have one about 1000' away to the Northwest. I walked around with my Sony 2010 and was able to faintly hear the noise as I got close to my neighbor's house. I left a message on their phone and later the owner gave permission to walk around the house even though nobody was at home that day. Sure enough, I found the noise was strongest from the center of their house. I called back and they said it would be OK to come back and locate the noise source when someone was home, but they were going to be away several days. Fortunately the next day, when TX9 had a very good signal, the birdie had drifted to 1824.0, and I was able to work him with no problem. Had that birdie not drifted, I would have been completely unable to copy him on 1826.5. To make a long story short, the problem was a switching power supply in a new white box computer they had purchased locally. Rather than dig into it myself, I simply took it back to the dealer along with my Sony 2010 and demonstrated the problem. While I waited, they swapped power supplies and the problem was gone. This was all done under warranty since the computer was brand new. Unfortunately I have several other much weaker birdies I have not been able to locate. The farther they are away, the weaker they are and also much harder to locate because of the distance to be covered to find them. I believe this is becoming a major problem at my location and there is really not much I can do about it except identify each source myself and then fix it. It's a shame that the FCC is allowing Part 15 devices like these switching power supplies to be put on the market. I should go back to the computer dealer, get the power supply's model number and manufacturer, and file a complaint with the FCC to send a message to the manufacturer. At least Riley Hollingsworth seems to be favorably inclined to take action on power line interference and electric fencers. 73, Bill W4ZV _______________________________________________ Topband mailing list Topband@contesting.com http://lists.contesting.com/mailman/listinfo/topband |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | RE: Topband: 160m noise, Jeff Maass |
---|---|
Next by Date: | Re: Topband: 160m noise, Joseph Dube |
Previous by Thread: | RE: Topband: 160m noise, Garry Shapiro |
Next by Thread: | Re: Topband: 160m noise, Joseph Dube |
Indexes: | [Date] [Thread] [Top] [All Lists] |