To: | topband@contesting.com |
---|---|
Subject: | Topband: SDR-1000 IMD-DR, blocking dynamic range, IP3,and IP2 measurements |
From: | Bill Tippett <btippett@alum.mit.edu> |
Date: | Fri, 16 Feb 2007 06:17:36 -0500 |
List-post: | <mailto:topband@contesting.com> |
W4EF: >"It has essentially the same dynamic range regardless of tone spacing" True but BDR is ~100 dB for the SDR-1000 versus ~130 for other rigs (ARRL measurements). BDR seems to be the weak point of SDR so far. Perhaps 32-bit sound cards will eventually solve this issue but current 24-bit sound cards all seem to share this weakness. 73, Bill W4ZV _______________________________________________ Topband mailing list Topband@contesting.com http://lists.contesting.com/mailman/listinfo/topband |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Topband: SDR-1000 IMD-DR, blocking dynamic range, IP3,and IP2 measurements, Tom Rauch |
---|---|
Next by Date: | Re: Topband: (no subject), Tom Rauch |
Previous by Thread: | Topband: SDR-1000 IMD-DR, blocking dynamic range, IP3,and IP2 measurements, Robert McGwier |
Next by Thread: | Re: Topband: SDR-1000 IMD-DR, blocking dynamic range, IP3,and IP2 measurements, Michael Tope |
Indexes: | [Date] [Thread] [Top] [All Lists] |