You can do fine with the usual dipped micas, in the 500V
series from Cornell-Dubilier, available at Halted, Mouser,
Digi-Key etc. It shouldn't be necessary to parallel capacitors,
but if it will make you feel more secure, use a half dozen
in parallel, won't cost much.
Rick N6RK
Jim Brown K9YC wrote:
> Crew,
>
> I'm thinking of following N6LF's advice on a rebuild of my 160
> vertical by tuning it low and adding series capacitance to tune out
> the resistance to match it to 50 ohms. Legal power will put about
> 220VAC across 2.2 nF, at a little less than 6A. I think my greatest
> concern is dissipation from the ESR of the cap. Once I get this
> working, I'll probably do something similar for 80M.
>
> My question is about what capacitors will work. I'm looking for
> about 2.2 nF (2,200 pF), and I'll run legal power with the fairly
> high duty cycle of a contest. I've got some 3kV and 6kV caps in the
> 100-500 pF range, and some 400VDC caps in the 10-100 nF range. I
> could series the LV caps or parallel the HV caps. Does anyone have
> experience or an educated guess?
>
> 73,
>
> Jim K9YC
>
>
> _______________________________________________
> NCCC mailing list (http://lists.contesting.com/mailman/listinfo/nccc)
> Post to: nccc@contesting.com
> Manage your subscription at: http://lists.contesting.com/mailman/options/nccc
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|