Is anyone here using WD-!A wire for a bi-directional Beverage having
success? I notice that mine performs very good in the forward
direction, but has severely reduced gain in the reverse direction. I
would like to hear if others are experiencing this reduced gain in
reverse direction. I did not notice this with my old 2
wire bi-directional Beverages (which I replaced with the WD-!A wire).
I am not sure I am setting up correctly. MY measured SWR is good
(less than 1.5) in both directions through 10 mHz. Any thoughts will
be appreciated. I am closely following the ON4UN Antenna Book design
and am in agreement with Tom, OH2BEN' who is using the same design.
Dave, W5UN
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|