Topband
[Top] [All Lists]

Re: Topband: Shunt Fed Question

To: cqkg8co@yahoo.com, TopBand List <topband@contesting.com>
Subject: Re: Topband: Shunt Fed Question
From: Art <k6xt@arrl.net>
Date: Sun, 07 Dec 2008 18:01:43 -0700
List-post: <topband@contesting.com">mailto:topband@contesting.com>
Brian Sarkisian, KG8CO wrote:
> I have 125 ft of Rohn 45 with a 4 element KLM 40 meter beam on top.
>
> 1. At what height would you attach the top of the gamma match?
>
> 2. How far away would you place the gamma match away from the tower.
>
>
> The tower currently has 120 100ft radials connected to it.
>
> Thank You
>
> Brian, KG8CO
>   

My 160 ant for 16 years til 2004 was a 160 ft R45 tower with 15 ft mast 
and several antennas. At the top was a 52 ft boom homebrew 20. It worked 
gangbusters on 160. However. It was fed at 32 ft AGL as a ground plane. 
The feed wire was attached at 90 ft AGL spaced 3 ft from a tower leg. 
All empircal, all based on junkbox availability. According to ON4UN's 
book using his best guess formula it was about equivalent to 5/8 wave. 
In the day I did not have a Z meter. I just matched for lowest SWR at 
1830. The match was narrow which, from the literature, I took to mean 
the ground losses were relatively low - performance seemed to bear that out.

Good luck with your setup.

73 Art
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband

<Prev in Thread] Current Thread [Next in Thread>