From: "Mike & Coreen Smith" <ve9aa@nbnet.nb.ca>
Subject: Topband: Contest - rig problems.
> The only way I can do CW now is to key the rig with the foot switch and
when
> down let up on the foot switch rig goes bk to RX.
> Strange problem indeed !
>
> Anyone heard of such a thing?
Mike if you are using a rig to computer interface and logging software I
would suggest that you get a series of snap-ons on the USB cable or run
about 6 to 8 turns on a ferrite ring. I had a similar problems despite,
good common point grounding, that only occured at the upper power levels.
I doesn't take much for the USB keyer port to freeze up from RFI and the USB
cable between ther computer and rig interface are a good place to start. A
single large ferrite ring worked for me.
Good luck and NB is rare in the CQ WW 160 event...so hope you get the
problem solved.
Cheers,
herb Schoenbohm, KV4FZ
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|