Topband
[Top] [All Lists]

Topband: Beverage Feed Line Choke Installation

To: topband@contesting.com
Subject: Topband: Beverage Feed Line Choke Installation
From: Bill Tippett <btippett@alum.mit.edu>
Date: Sun, 31 May 2009 22:33:38 -0400
List-post: <topband@contesting.com">mailto:topband@contesting.com>
K5PC:
 > If these snap-ons work, they will make life simpler, and are much easier on
the wallet. I bought six cores from Mouser for about $90.

         Either type will work, but the DXE style choke can be made
using mix 73 binocular cores costing $0.429 each, instead of $15 each:

http://www.newark.com/jsp/search/productdetail.jsp?SKU=02E8908

Wind 3 turns per side, ground one side at the choke and the other
using the shack ground.

                                 73,  Bill  W4ZV



_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband

<Prev in Thread] Current Thread [Next in Thread>
  • Topband: Beverage Feed Line Choke Installation, Bill Tippett <=