Has anyone tried 75 ohm triax video cable with the outside shield floating
at one end and earth at the other in the form of a Faraday sheild in feeding
a Beverage matching network? Or even shielded 75 ohm twisted pair with a
simple balun at each end with the normal Beverage ground in place.
The Faraday shield used to work for me for long video and audio runs to get
rid of hum. Yes I know the hum was VLF and related to 60hz mains common
mode pickup....but would the prinicple of a Faraday work at 1.8 especially
if multiples of a quarter wave were used to get out to the feed point.
The reason I ask is that the original Beverage designs included Faraday
shields on the matching networks but no mention is made today as that
possible solution to random pickup.
Herb, KV4FZ
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|