Well first of all dont expect instant gratification on here as there are
usually delays in a post appearing.
As far as the question you can phase them to get figure 8 patterns broadside
and end fire.
I had a pair of 80M 1/4 wave spaced 1/4 wave also fed as 1/2 waves on 40M at
a prior QTH.
Carl
KM1H
----- Original Message -----
From: "Dale Long" <dale.long@prodigy.net>
To: <Topband@contesting.com>
Sent: Tuesday, November 22, 2011 9:16 AM
Subject: Topband: no response to query: feeding phased verticals at halfwave
spacing
> Gentlemen:
>
>
>
> I am not one who thinks the whole world revolves around my concerns. And
> I
> recognize that some research on my part may be necessary. ( I have read
> ON4UN's Low-Band Dxing)
>
>
>
> But I do think this is a reasonable question, and think that there are
> knowledgeable folks who might provide some advice. Unfortunately I have
> never done any antenna modeling.
>
>
>
> Please let me know your thoughts.
>
>
>
> Thanks,
>
>
>
> Dale N3BNA
>
>
>
> From: Dale Long [mailto:dale.long@prodigy.net]
> Sent: Saturday, November 19, 2011 3:05 PM
> To: 'Topband@contesting.com'
> Subject: feeding phased verticals at half wave spacing
>
>
>
> Gentlemen:
>
>
>
> I have been told repeatedly that phased verticals should be spaced 1/4
> wavelength apart. Ok, I am willing to accept that.
>
>
>
> My question is if you have verticals that are 1/2 wave apart, would it not
> give some pattern, whatever that should be?
>
>
>
> If you were looking for an endfire pattern how should you feed such
> verticals?
>
>
>
> If you have specific questions, you may contact me directly at
> dale.long@prodigy.net
>
>
>
> Thanks and 73,
>
>
>
> Dale N3BNA
>
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1411 / Virus Database: 2092/4032 - Release Date: 11/22/11
>
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK
|