Topband
[Top] [All Lists]

Re: Topband: Reducing Noise in the Shack

To: Wayne Willenberg <wewill747@gmail.com>
Subject: Re: Topband: Reducing Noise in the Shack
From: DAVID CUTHBERT <telegrapher9@gmail.com>
Date: Thu, 21 Jun 2012 12:59:39 -0600
List-post: <topband@contesting.com">mailto:topband@contesting.com>
The W7NQN line filter is a differential-mode filter. You need a filter that
is designed for common-mode filtering.

Dave WX7G
On Jun 21, 2012 10:32 AM, "Wayne Willenberg" <wewill747@gmail.com> wrote:

> As I mentioned in a post a few days ago, I am at the very beginning of
> being able to operate on 160 and 80M’s.  (To date, I have only operated on
> 10, 15 and 20M.) I have been doing a lot of reading, primarily ON4UN’s
> “Low-Band DXing.”
>
>
> My rig (FT-dx5000) is located on a desk.  Immediately under the desk is my
> computer, and just above the rig is a shelf on which sits 2 flat-screen
> monitors.
>
>
> One of the points made in “Low-Band DXing” is the necessity of reducing
> noise in the shack.  The author states at page 7-75: “It is essential to
> feed the equipment at the shack through high-quality mains filters.”  In
> looking for such filters, I have come across the W3NQN AC Line Filter.  It
> seems to be built with quality components, but I have not been able to find
> any specs on the amount of attenuation it provides to EMI and RFI noise at
> various frequencies (either common or differential mode).  Could someone
> recommend a “high-quality mains filter” or comment on the W3NQN filter?
>
>
> The author goes on to state: “The bottom side of the operating table in my
> shack is completely covered with aluminum sheet.  This represents a lot of
> capacitance and virtually zero inductance, which is just what you want!
> Quality mains filters are bolted directly to those sheets and the mains
> outlet to which the equipment is connected is connected as well.  The
> ground plane is connected with very short low-inductance wide straps to
> long copper ground rods.”  Would someone please explain to me the purpose
> of this ground plane and how it helps reduce noise? How does “a lot of
> capacitance and virtually zero inductance” under a transceiver help reduce
> noise?
>
>
> Thanks in advance for advice and help for a newcomer.
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK
>
_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK

<Prev in Thread] Current Thread [Next in Thread>