To: | <topband@contesting.com> |
---|---|
Subject: | Re: Topband: Radial Question |
From: | "Mike Greenway" <K4PI@BELLSOUTH.NET> |
Date: | Tue, 7 Jan 2014 08:49:18 -0500 |
List-post: | <topband@contesting.com">mailto:topband@contesting.com> |
My 160 vertical is right up against the house so I have used “under the house” radials for years. The basement is not finished out so I just tacked them to the floor joist with a staple gun and brought them back to a central point at a window just adjacent to the tower and drilled a hole through the window frame large enough to handle some larger wire which connected to the ground radial system. As time went on I put aluminum screen wire along the joist and connected that into the radial system. I have had this system in place over 25 years. 73 Mike K4PI _________________ Topband Reflector Archives - http://www.contesting.com/_topband |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Topband: Feeding 160M Vertical on 80M, Tom W8JI |
---|---|
Next by Date: | Re: Topband: Feeding 160M Vertical on 80M, Charlie Cunningham |
Previous by Thread: | Re: Topband: Radial Question, David Aslin |
Next by Thread: | Re: Topband: Radial Question, KB8NTY |
Indexes: | [Date] [Thread] [Top] [All Lists] |