Topband
[Top] [All Lists]

Re: Topband: Skimmer calibration

To: topband@contesting.com
Subject: Re: Topband: Skimmer calibration
From: Jim Brown <jim@audiosystemsgroup.com>
Reply-to: jim@audiosystemsgroup.com
Date: Mon, 18 Aug 2014 09:47:58 -0700
List-post: <topband@contesting.com">mailto:topband@contesting.com>
On Mon,8/18/2014 4:53 AM, Tom W8JI wrote:
A live comparison of S/N ratio or relative level over time is with very few exceptions an excellent comparative test. It is much more accurate than S meters or absolute levels without a comparison reference. As such, the RBN is a great tool for evaluating systems.
Yes. BUT -- my experience has been that I must average hundreds of data 
points to get meaningful data. The reasons are simple -- we must contend 
with QSB, and as Tom noted in another post, nulls in the patterns of 
antennas at both ends. A few years ago, I tried to compare two 160M 
antennas using JT65 and W6CQZ's JT65 RBN. On a good night, I would see 
reports from 3-4 stations east of the Mississippi. I alternated between 
the two antennas for hours, putting the reports in a spreadsheet, and 
studying the data. Modelling predicted differences of a few dB, and I 
never found that the data was good enough to confirm the models.  The 
antennas are passive arrays of fairly tall verticals of a quarter wave 
or less, so there are no vertical nulls in their pattern. I can clearly 
hear their directivity on RX, but their gain is what I was trying to 
confirm.
73, Jim K9YC


_________________
Topband Reflector Archives - http://www.contesting.com/_topband

<Prev in Thread] Current Thread [Next in Thread>