| To: | topband <topband@contesting.com> |
|---|---|
| Subject: | Re: Topband: vertical balun |
| From: | shristov <shristov@ptt.rs> |
| Date: | Sat, 30 May 2015 06:40:14 +0200 |
| List-post: | <topband@contesting.com">mailto:topband@contesting.com> |
Bob Kupps wrote: > Right now we are feeding it through a 4:1 balun (not a unun) with 12.5 ohms > on the > balanced side, and the SWR is 1.4 with no matching network. You should get quite a reasonable SWR with no matching at all. A good high-impedance common mode choke is recommended. 73, Sinisa YT1NT, VE3EA _________________ Topband Reflector Archives - http://www.contesting.com/_topband |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Topband: vertical balun, Bob Kupps via Topband |
|---|---|
| Next by Date: | Re: Topband: Topband Digest, Vol 149, Issue 17, Vaughn Worth via Topband |
| Previous by Thread: | Topband: vertical balun, Bob Kupps via Topband |
| Next by Thread: | Topband: vertical balun, Dr. Wolf Ostwald |
| Indexes: | [Date] [Thread] [Top] [All Lists] |