| To: | topband <topband@contesting.com> |
|---|---|
| Subject: | Re: Topband: [Bulk] Re: beverage layout |
| From: | Mike Waters <mikewate@gmail.com> |
| Date: | Sat, 7 Nov 2015 12:14:02 -0600 |
| List-post: | <topband@contesting.com">mailto:topband@contesting.com> |
Bingo! :-) I would likely pick RG-6 (or CATV F-6) with a molded-on plated steel messenger cable for that, because it was designed to take a lot of tension. The supports could be farther apart. The messenger cable could be connected to the shield at both ends. 73, Mike www.w0btu.com On Sat, Nov 7, 2015 at 12:03 PM, Grant Saviers <grants2@pacbell.net> wrote: > Yet another alternative is the coax cable bidirectional Beverage ... > _________________ Topband Reflector Archives - http://www.contesting.com/_topband |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Topband: [Bulk] Re: beverage layout, Grant Saviers |
|---|---|
| Next by Date: | Re: Topband: beverage layout, Jon Zaimes |
| Previous by Thread: | Re: Topband: [Bulk] Re: beverage layout, Grant Saviers |
| Next by Thread: | Re: Topband: beverage layout, Steve Baughn |
| Indexes: | [Date] [Thread] [Top] [All Lists] |