Dave, I converted to phillistrand 6700lb about 25 years ago. At that time their
termination was with 4 cable clamps at each end. They were torqued to 25 ft/lbs
as per instructions. I have 80ft Rohn 45G with a Telrex 20M546 at 81 ft, Hygain
153BAS at 90 ft and a 103BAS at 100ft. My phillistrand ends are connected to 3
1/2inch galv pipe in the ground with concrete to 10 ft below. They are above
ground at 8 ft. I have had winds over 100 mph and all is well. I use an Orion
2800 rotor.
73 de Price W0RI
On Monday, November 9, 2015 9:09 PM, "Dave Blaschke, w5un" <w5un@wt.net>
wrote:
Same here.
W5UN
On 11/10/2015 1:00 AM, Herbert Schoenbohm wrote:
> I use Phyllistran guy wires here but never run them to the ground as a
> simple brush fire could bring your towers down. Always have at least a
> 3O foot steel guy wire for the last section so you guys will survive.
> If you have the unusual situation where some rodents will try to climb
> the guys just put a large funnel on the wire backward so they can't
> ever pass that.
>
> Herb Schoenbohm, KV4FZ
>
> On 11/9/2015 8:24 PM, Merv Schweigert wrote:
>> Boxbe <https://www.boxbe.com/overview> This message is eligible for
>> Automatic Cleanup! (k9fd@flex.com) Add cleanup rule
>> <https://www.boxbe.com/popup?url=https%3A%2F%2Fwww.boxbe.com%2Fcleanup%3Ftoken%3DQEY%252F2p0xCxiB32oIy5kuNplHoeq5Wr3GGgJOUuUiH%252Fe7u8DVxQWXq2z10bIFeul0Md1LwKh3YZf7oGxv%252B94ykpQ8zFW7PCaNcmpbd%252F2ZkWseR%252BPHymTQujugQTBfT3SZ50daEcOrRcY%253D%26key%3DJCnl296qjsV8DmFaprjDtKvLZ52dXJQayGP09bWZodA%253D&tc_serial=23250128351&tc_rand=663410211&utm_source=stf&utm_medium=email&utm_campaign=ANNO_CLEANUP_ADD&utm_content=001>
>>
>> | More info
>> <http://blog.boxbe.com/general/boxbe-automatic-cleanup?tc_serial=23250128351&tc_rand=663410211&utm_source=stf&utm_medium=email&utm_campaign=ANNO_CLEANUP_ADD&utm_content=001>
>>
>>
>> I have this same problem all the time, I tried to put a BOG out,
>> made of teflon wire,
>> thinking they would not eat teflon, it lasted a few days and was chewed
>> In pieces, Coax the same,
>> Latest I found is my phyllistran guy wires are all chewed near the
>> bottom,
>> herds of deer are the problem with that, anything on the ground is done
>> away with by mongoose.
>> I have found no solution, only sunny part is the deer keep me in
>> steaks and
>> burger all year round, mongoose is good for nothing.
>> Merv K9FD/KH6
>>
>>
>>
>> I can't afford to spend $150 each time an animal feasts on it. I need
>> to do something different! Incidentally, the beverage still has great
>> directivity, but signals are very weak with the bad cable. It is
>> barely useable now as a result. 73 Dave K1WHS
>> _________________
>> Topband Reflector Archives - http://www.contesting.com/_topband
>
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|