Paul, I have one of these Bev Flex 4 antennas which we are getting ready to
deploy and test as a reversible beverage. It uses RG6 for the antenna element.
Here is a link to the manual:
https://jkantennas.com/assets/jk-bevflex-4-manual.pdf
73 Charlie N8RR
BevFlex-4 Low Noise Receiving Antenna Installation
Manual<https://jkantennas.com/assets/jk-bevflex-4-manual.pdf>
jkantennas.com
Page-5 BevFlex-4 Installation Manual Rev 1.2 May 2016 As a reminder, this is a
RECEIVE ONLY ANTENNA AND MUST NEVER BE CONNECTED DIRECTLY TO THE OUTPUT OF A
________________________________
From: Topband <topband-bounces@contesting.com> on behalf of Paul Baldock
<paul@paulbaldock.com>
Sent: Sunday, August 21, 2016 6:36 PM
To: topband@contesting.com
Subject: Topband: Using RG-6 as elements wire for 2 wire beverage?
Has anybody used RG-6 as the antenna element(s) wire for a reversible
beverage? Do you have any design info?
Thanks
- Paul KW7Y
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
Avast | Download Free Antivirus for PC, Mac &
Android<https://www.avast.com/antivirus>
www.avast.com
Protect your devices with the best free antivirus on the market. Download Avast
antivirus and anti-spyware protection for your PC, Mac and Android.
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|