Re: Topband: Soldering radials?

[Rob Atkinson <ranchorobbo@gmail.com>]

Stranded wire is harder to work with.  It is harder to get to lay down
flat either on top or in a trench, harder to bolt or solder, is more
expensive, does not take high heat as well.



On Thu, Oct 13, 2016 at 7:00 AM, Jorge Diez - CX6VM
<cx6vm.jorge@gmail.com> wrote:
> Rob
>
> why you don't use stranded wire for radials?
>
> 73,
> Jorge
> CX6VM/CW5W
_________________
Topband Reflector Archives - http://www.contesting.com/_topband