I used to run my RBOG over the buried radial field of an 80m Inv-L
here some years ago. What I found was that the beverage directionality
was absolutely wrecked. To avoid running it over the radials, I had to
very substantially "zig-zag" the RBOG on the property line but -- even
in that form -- it still worked much better than it did atop the
radials.
YMMV but condx here were 30x 1/4-wave radials buried ~1-2"; RBOG was
ON4UN -type made of RG-6.
GL
Mike N1TA
On Tue, Jan 9, 2018 at 4:41 PM, KA2FIR <ka2fir@optonline.net> wrote:
> Hi,
>
> Can a RBOG run through a radial field without compromising performance?
>
> Tnx,
>
> Mike KA2FIR
>
>
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|