Jeff, Et. Al.,
Rather than wrap the wire around the insulator opening or itself, how
about a "split bolt" wire clamp with the saddle on the tension side? A
good "mechanical knot". I can take photo of one if needed. Here is a
website link:
http://www.elecdirect.com/split-bolts-grounding-products/split-bolt-connectors/copper-alloy-2-conductors-16-str-8-str
There is a larger one on the same "elecdirect dot com" page on the
internet as well.
GL & 73, George, K8GG
> I'll be erecting a 95-foot Inverted-L antenna. At the shack end of the
> antenna, right before the insulator, I'll need to wrap the wire around
> itself a few times so that it doesn't slip through the insulator. Because
> the wire itself is insulated, is there any negative affect, such as a
> choking action that might take place?
>
> 73, Jeff KH6O
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|