Hi Trevor,
It is very well described in the PST user manual, but can be a bit confusing.
First of all you create a second “instance" of PST rotator. (or however many
you need.)
Under settings select “Relay board”
When you do this it will open another window called ‘Relays”
On that Relay window, under setup click Relays and you will see all the
possible relays that will work with the program. In my case I select the
Denkovi product. (Note that the KMtronic WEB board will be truly IP addressable
which is best if you don't control the station from the PC at the remote like I
do via TeamViewer.)
Then select board setup to configure the USB addy or IP addy connection.
Then select “automatic control setup” and a new window pops up…in that window
select Azimuth. There you select which relay is what direction. (notice you can
also select time as a selection parameter or band etc for other functions)
Finally, back on the relay setup make sure you select “automatic control” ie
toggle it ON
Codrut, YO3DMU is **very** responsive and will respond right away via email
with any questions.
de Steve VE6WZ
> On Jul 10, 2018, at 1:30 PM, MR TREVOR DUNNE <ei2glb@eircom.net> wrote:
>
> Can you give so more info on how the PST software works/connects to the
> board, I use it to turn my rotator but have never seen any option to control
> anything else in it,
>
> Thanks
> Trevor
> EI2GLB
> ----- Original Message -----
> From: VE6WZ_Steve <ve6wz@shaw.ca>
> To: Herbert Schoenbohm <herbert.schoenbohm@gmail.com>
> Cc: TopBand List <topband@contesting.com>
> Sent: Tue, 10 Jul 2018 14:56:36 +0100 (IST)
> Subject: Re: Topband: Beverage selector switch via IP
>
> Like RA0FF I use the Denkovi 8 relay USB board together with the PST rotor
> control software that provides a standard rotor control interface. Point and
> shoot at the direction with the mouse to select the direction. The PST rotor
> software includes software to communicate with the Denkovi boards as well as
> others. I use two of these at the remote station for selecting both Beverage
> and the 9 circle directions.
> I have a video of my set-up here: https://www.youtube.com/watch?v=zFC4Nfa8o_w
> <https://www.youtube.com/watch?v=zFC4Nfa8o_w>
>
> de steve ve6wz.
>
>
>> On Jul 9, 2018, at 5:22 PM, Herbert Schoenbohm
>> <herbert.schoenbohm@gmail.com> wrote:
>>
>> Looked all over for one of these so my Beverages could be selected remotely
>> via an IP address. Is there such a device marketed anywhere?
>>
>> Herb, KV4FZ
>> _________________
>> Topband Reflector Archives - http://www.contesting.com/_topband
>
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
>
> _________________
> Topband Reflector Archives - http://www.contesting.com/_topband
_________________
Topband Reflector Archives - http://www.contesting.com/_topband
|