Re: Topband: Toploaded vertical - SWR

[Don Kirk <wd8dsb@gmail.com>]

>
> Herb (KV4FZ) mentioned an L network, and that is what I always use.  Very
> simple, and you just plug you're measured complex impedance values (at the
> frequency you want to be resonant) into one of the many online L network
> calculators to determine the amount of inductance and capacitance required
> for the L network.  I normally just wind my own coil for the inductance,
> and use high voltage silver mica caps for the capacitor.
>
_________________
Topband Reflector Archives - http://www.contesting.com/_topband