Hi Frank,
I don't know anything about 3-way splitters, but if I were in your
situation I think I would sacrifice 1 dB and make a 4-way splitter using
3x 2-way splitters. 2-way is much more commonly used and documented, and
quite probably easier to achieve than 3-way. The 4th port is simply
terminated in a load, of course.
73, Greg, ZL3IX
On 2018-12-25 02:00 a.m., Frank VO1HP wrote:
Does anyone have a schematic for a 75ohm three port splitter using #73
binocular cores. I have those on hand. Need to feed beverage to two
TS590SG’s and Skimmer SDR in CQWW160.
73 Frank VO1HP
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|