I got a cheap set from Home Depot.
Ideal 33-522 Internet #300134420
Works on DXE RG-6 both kinds of cable.
Works good for me.
73
Fred KB4QZH
On 2/4/2021 9:52 AM, Ed Stallman wrote:
Rick I use a tool from The RF Connection
https://rfconnection.com/tooling-crimp-tools-cable-prep-tools-testing-equipment/
It's the first tool on the list .The owner is very helpful over the
phone .
Ed N5DG
On 2/3/2021 11:13 PM, Richard (Rick) Karlquist wrote:
RG-6 is a special case in that virtually all of it
uses a copper clad steel (CCS) center conductor.
Many fine wire cutting tools are designed strictly
for copper, and can get ruined if used for steel.
I also want the cutter to slice the end off of the
RG-6 cleanly, rather than crushing it and distorting
the circular shape of the coax.
Can anyone recommend a quality cutting tool for RG-6?
73
Rick N6RK
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband
Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband
Reflector
_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
|