Re: Topband: Low frequency RX antenna

["Joe Subich, W4TV" <lists@subich.com>]

However, the K9AY RDF is generally given within the range
shown by Greg for the "Optimized VE3DO" (7.7 dB per W8JI).

That would raise a question whether the additional effort
for the VE3DO loop is justified.  Further, an endfire pair
of K9AY loops can be erected in approximately the same
area as the largest of the W8WWV VE3DO loops for even better
performance.

73,

   ... Joe, W4TV

On 10/2/2024 8:11 PM, Tim Duffy wrote:
> Hello Wes;
>
> The VE3DO loop has a much better front to back ratio compared to a K9AY.
>
> The K9AY is easier to erect
>
>   
>
> 73
>
> Tim K3LR
>
>   
>
> From: Wes Stewart [mailto:n7ws@yahoo.com]
> Sent: Wednesday, October 2, 2024 6:28 PM
> To: topband@contesting.com; Tim Duffy
> Subject: Re: Topband: Low frequency RX antenna
>
>   
>
> Tim,
>
>   
>
> Why is this preferred over a K9AY?
>
>   
>
> Wes  N7WS
>
>   
>
> On Sunday, September 29, 2024 at 08:10:12 PM MST, Tim Duffy <k3lr@k3lr.com> 
> wrote:
>
>   
>
>   
>
> Greg, W8WWV has done some new work on the VE3DO loop.
>
>   
>
> I use 3 of them here at K3LR.
>
>   
>
> Greg's latest paper is here:
>
>   
>
> http://www.k3lr.com/engineering/VE3DO/OptimizedDOLoop.pdf
>
>   
>
>   
>
>   
>
> 73
>
>   
>
> Tim K3LR


_________________
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector