On Mon, 10 Jun 1996, Big Don wrote:
> On Sun, 9 Jun 1996, Gary Schwartz wrote:
> > Anyone have ONE (1) torque arm for Rohn 45 that they'd like to part with
> > or have sitting in the tower parts pile? I'm talking about the tube that
> > is welded to the flat piece of bar stock, not the whole clamping assembly.
> > As far as I am aware, they can't be bought individually. I've thought
> > about having one fabricated but the galvanizing is a pain.
> Having something like this fabricated sounds risky. Even with the standard
> Rohn part (speaking of Rohn 25 with which I'm familiar), one weld, where
> the bar attaches to the tube, stands between you and disaster. Welds are
> notoriously vulnerable to fatigue, and even though there appears to be no
> history of these failing, your weldor could have had a bad day.
> Big Don does not trust the Rohn part. All my torque bars have an
> additional safety loop of guy cable which goes thru the hole at the end
> where the guy attaches, and around the corresponding tower leg above the
> torque arm bracket. That way, if the weld in the torque bar lets go, at
> least something is there to back it up.
> Big Don
I agree! The safety loop sounds like an excellent idea.
/ K9GS |______________________________
/ FP/K9GS, TO5M |Society of Midwest Contesters |____________________
( | email@example.com |Secretary/Treasurer/
\ Gary Schwartz | K9GS@WA9KEC.WI.USA.NOAM | Greater Milwaukee/
\__________________| PacketCluster: NB9C | DX Association (
(________________________________| GMDXA \