After several month of work rebuilding my house, now is time to rebuild
the antenna system.
I bougth 2 month ago, a KLM-34XA , with heavy duty boom option ( about
150 of total weight ) . I have my old 40-2CD too, and I will buy a self
supported tower ( electric high volatage tower ).
The tower will have about 85 feet high, and is pyramidal, with 6 feet at
bottom and 2 feet at top, more or less, and accept up to 4000 lb of
horizontal effort at top.
The problem now is to decide wich rotator i will use.
At present I have 3 rotator ( rests of my monobanber's systems ), an
T2X, an HAM4 and a RC5-A. My experience with these rotator is that de
RC5-A ( from Create ) is the best.
I planned to put the both antennas in the same self-supported tower in a
big and heavy mastil of 12 feet. And in order to make a good system with
the mininum of maintenance ( its not to nice to work at 85 feet over the
ground ) I must decide wich rotator to buy, a M2 OR2800 or a Yaesu
I will appreciate any comment about your expeciences with rotators and
large antennas systems.
Thank's a lot in advance.