The symptom described below happens when the indicator potentiometer
in the rotor opens or when the wires from the control box to the
rotor open. This is in my opinion, a serious design flaw in this
rotor. I do not know of a work around.
The schematic and manual are available from TIC - call Todd at
73, John K1FWF
> I know some of you ring rotator gurus may have had this problem happen.
> Ed, W0SD, is experiencing a couple of problems with his 1022. He
> mentioned that the rotator does not turn at all, and the most interesting
> part is that when he turns the direction control knob on the control box,
> the indicator needle tracks with the rotation of the knob. Any ideas on
> possible solutions to the problem?? Also, he is wondering if anyone has a
> parts list and/or schematic diagram? Thanks for all the help. 73,
> todd, WD0T
John D. Allen, email@example.com