I'm hoping someone out here can help me with some spec's. I have what
appears to be Rohn tower, except that the dimensions are not right. My
understanding is that Rohn 25 tower sides are approx. 11-3/4". The
sides on mine are appprox. 15" per side and I assumed it was Rohn 45 and
ordered a rotor shelf for same.
Now I find out that 45G is approx 18" per sideand needless to say the
bracket does not fit. I am told that Rohn manufactured some tower for
Motorola, to their specs and it certainly looks like Rohn product, but i
larger that 25G and smaller than 45G.
I have 4 straight sections and 1 top section. The top section has a 36"
x 2-1/4" tube. This tower was given to me and appears to be in good
condition, I just am unsure was it is.
About my installation, I am setting 4 feet of the bottom section in
cement and have a house bracket at 18 feet. I had been hoping to get by
without guying it and putting up a Hygain TH3. Now I'm not sure.
Any Information/specs. would be greatly appreciated.
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com
Sponsored by Akorn Access, Inc & KM9P