[Top] [All Lists]

Grounding CATV Hardline

To: <>
Subject: Grounding CATV Hardline
From: (
Date: Fri, 18 Oct 1996 17:20:32 -0400
Get a block of aluminum about 2.25" square... have a local machine shop drill
two holes through it.. one hole to be the right size to clamp to the leg of
the tower (or ground rod as the case may be) and the other to clamp to the
hard line (sans jacket).. then they can saw half blocks out of  this  to form
clamps, add 3/16" clamp bolt holes, and you are in business...
I get my aluminum from:
Dillsburg Aeroplane Works
Dillsburg, Pa

Cheers  ...  Denny

FAQ on WWW:     
Administrative requests:
Sponsored by Akorn Access, Inc & KM9P

<Prev in Thread] Current Thread [Next in Thread>