Given your bad experiences with water pipe masts, I can't imagine why you
want to use water pipe again and "don't have time" to use material
designed for mechanical use instead of water!
You live only about a two hour drive from Dillsburg Aeroplane Works in
Dillsburg, PA. They have a huge stock of Chrome-Moly mast in every
conceivable diameter and wall thickness, and their prices are low!
Next time you have to replace your bent water pipe mast (and the damaged
antennas you installed on it), you might wonder why you didn't take that
short drive down I-81 to Dillsburg...
On Sun, 20 Oct 1996 email@example.com wrote:
> I wonder what people use for mast that sticks up about 10 or so
> feet above the tower and holds more than one multiband antenna?
> I put up 1 1/2" galvanized steel pipe and it failed......bent right
> over. Wow!
> If I use 1 1/2" galvanized steel again,only this time schedule 80,
> which is 1/4" wall thickness,is that sufficient? And if that is
> sufficient, what would be the difference between steel or aluminum pipe
> if they both are the same thickness?I don't have time for this "chrome
> molley" or whatever it is as this must be changed immedietly, no time to
> wait for freight! One last question, I also suppose I could use 2"
> instead of 1 1/2", but adding all this more weight,is it really going
> to add all that more strength? Helping answers appreciated!!!
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com
Sponsored by Akorn Access, Inc & KM9P