Towertalk
[Top] [All Lists]

Crank-Ups & Coax

To: <towertalk@contesting.com>
Subject: Crank-Ups & Coax
From: G3SEK@ifwtech.demon.co.uk (Ian White, G3SEK)
Date: Sat, 7 Dec 1996 08:32:37 +0000
Joe Spinosa wrote:
>
>Here's the question:  How do people route rotator control cables and
coax runs 
>on crank-up towers?  Are the coax runs supported on each section?
>... Does everything just sort of flop around the yard?

Yes - it happens a lot in the UK where crank-up towers are the norm.
Whatever you do, the coax will flop around in the yard and will look
absolutely terrible to your neighbors. The only solution is to keep the
tower cranked up all the time  :-)


73 from Ian G3SEK          Editor, 'The VHF/UHF DX Book'
                          'In Practice' columnist for RadCom (RSGB)
Professionally: 
IFW Technical Services     Clear technical English - world-wide.

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P

<Prev in Thread] Current Thread [Next in Thread>