Towertalk
[Top] [All Lists]

Rotor leads

To: <towertalk@contesting.com>
Subject: Rotor leads
From: crc@phoenix.net (C. R. Crutchfield, K5BC)
Date: Tue, 10 Dec 1996 02:30:39 +0000
I have a tower located 200' from the radio shack, the tower is 125' 
tall.  My plans are to run the leads in conduit below ground and am 
wondering how well the rotor (TailTwister) will perform.  By the time I 
get through running the lead for the rotor it will be approx. 350'.  
The lead I have is 2/12 gage and 6/14 gage.  I'm hoping the voltage drop 
won't be that much but am not sure.  Any suggestions? 

73's, Bob, K5BC

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P

<Prev in Thread] Current Thread [Next in Thread>