An EXPERT guess is that the tower will either buckle, twist, or the
cable will snap from the extra down load of guys, especially if they are
N3HKN soon to be towerless....
At 06:54 PM 12/20/96 -0800, Bob Morris K2RK wrote:
>Paul Beckmann wrote:
>> Steve raised an interesting question about it being BAD to guy
>> towers. Consider this, however: is it not true that Rohn 25/45/55 tower
>> sections can be used both in self-supporting (as I am planning) or in guyed
>> configurations?? This seems to be NOT a bad thing. But.... the foundations
>> are different and the wind area capacities are different...
>> Another thing: I heard that Universal (aluminum, high flex structures)
>> were never supposed to be guyed.
>> I know nothing about crank-ups (and maybe nothing about the subjects
>> mentioned above!)
>> Merry Christmas to all!
>> --Paul Beckmann email@example.com
>> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>> Submissions: firstname.lastname@example.org
>> Administrative requests: towertalk-REQUEST@contesting.com
>> Problems: K7LXC@contesting.com
>> Sponsored by Akorn Access, Inc & KM9P
>Remember seeing a chart an old Rohn book, giving specs on self-support
>for 25/45/55, but can't find anything in semi-current ones. ???
>My original post was to start the discussion, hoping for all of us to
>hear from an expert. My guess is to put'm up the way they were designed.
>If it's free-standing, it's designed to flex and put the stress and
>movement different from a guyed system....
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Administrative requests: towertalk-REQUEST@contesting.com
>Sponsored by Akorn Access, Inc & KM9P
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com
Sponsored by Akorn Access, Inc & KM9P