Towertalk
[Top] [All Lists]

Tuning verticals

To: <towertalk@contesting.com>
Subject: Tuning verticals
From: thomas@cybrzn.com (thomas@cybrzn.com)
Date: Mon, 30 Dec 1996 20:38:46 -0500
Gentleman:
I am in final stages of putting together 1/4 wave vertical for 80M, with
about 70 on-ground radials. The radiator will consist of aluminum
tubing, tapering from 2-3/8" to 1-1/4" o.d.
Can I lay the vertical on a pair of sawhorses and employ a dip
oscillator to find the resonant length? Or, how about standing it up and
tieing it off about 2 feet away from my tower so I can climb up and trim
off the top end (would not be using any radials for this procedure), or
would the proximity of the tower cause a shift in the resonant
frequency. Will adding the radials later cause it to resonate on a
different frequency? Would prefer to do the trimming at the top end, as
I will have the feedpoint hardware, etc already in place at the base.
What say, antenna gurus?
Thanks in advance for your input.

Tom K0SN
Porterfield, Wi.



--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P

<Prev in Thread] Current Thread [Next in Thread>
  • Tuning verticals, thomas@cybrzn.com <=