[Top] [All Lists]

Ham-II Rotor Anomaly

To: <>
Subject: Ham-II Rotor Anomaly
From: (T. A. Russell)
Date: Sat, 08 Feb 1997 07:36:59 EST
Disconnect the wires at terminals 3 and 7 from the control box and
the resistance between them. It should read 500 ohms. ( If it is open,
there is
a break in the potentiometer or the control cable.)

You can use an ohmmeter to determine position by measuring the resistance

between either wire and ground which is a good trick if one side is open.

This trick can be used on all HAM series rotors.

de Tom - N4KG

FAQ on WWW:     
Administrative requests:
Sponsored by Akorn Access, Inc & N4VJ / K4AAA

<Prev in Thread] Current Thread [Next in Thread>