At 10:13 AM 2/10/97 -0600, you wrote:
>I know it's a good idea, but did anyone ever have a tower permit denied
>because it was within falling distance of electrical lines >250V?
>The local building inspector cites NEC 810-13, something that the tower
>cannot be within falling distance + 2' of power lines.
>County zoning thinks it's okay if 2/3rds of your tower falls on the
>neighbor's property, but the township doesn't want it near any power
>Again, yes, it's a good idea, but is it really "code"? (I don't have
>the NEC handy to determine if what his says is valid or correct.)
Don't know what the spec is for >250 volts but for <250 volts it is
the 2 ft mentioned in NEC 810-13. Would have to assume that it
is even greater for the higher voltages--so maybe you are getting
off easy if your lines are >250 volts.
"Where proximity to open electric light or power service conductors
of less than 250 volts between conductors cannot be avoided,
the installation shall be such as to provide a clearance of at least
2 feet (610mm)."
gl es 73 John W0UN
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com
Sponsored by Akorn Access, Inc & N4VJ / K4AAA