In a message dated 97-03-06 13:13:10 EST, email@example.com (MICHAEL W.
> Does anyone have such a tower that has a Create Rotator in it and
> what rotator plate fits in the top section??? Tri-Ex has two rotator
> plates; one that fits a Ham IV and one that fits a Tailtwister.
> Need to know which plate to order that would be correct for the
> Create RC5 rotator --
The Ham IV and TailTwister both use the same 4-hole bolt pattern. The
T2X adds 2 more bolt holes for a total of 6. You can mount a Ham IV on a T2X
Most rotator shelves come with 4 bolt holes in the Hy-Gain pattern and
some include the extra T2X holes.
Create rotators have 4 holes but they are in a different spot than the
Hy-Gain ones. Create has an adapter available to go from their rotator to a
Hy-Gain bolt pattern. Rohn solves this problem by having slotted holes that
will accept either.
73, Steve K7LXC
TOWER TECH -- professional tower supplies for industry and amateurs
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com
Sponsored by: Akorn Access, Inc. & N4VJ / K4AAA