[Top] [All Lists]

[TowerTalk] Tri-ex tower / create rotator

To: <>
Subject: [TowerTalk] Tri-ex tower / create rotator
From: (
Date: Thu, 6 Mar 1997 16:29:04 -0500 (EST)
In a message dated 97-03-06 13:13:10 EST, (MICHAEL W.
ELLIOTT) writes:

> Does anyone have such a tower that has a Create Rotator in it and 
>  what rotator plate fits in the top section???  Tri-Ex has two rotator
>  plates;  one that fits a Ham IV and one that fits a Tailtwister.
>  Need to know which plate to order that would be correct for the 
>  Create RC5 rotator  -- 
Mike --

       The Ham IV and TailTwister both use the same 4-hole bolt pattern.  The
T2X adds 2 more bolt holes for a total of 6.  You can mount a Ham IV on a T2X

      Most rotator shelves come with 4 bolt holes in the Hy-Gain pattern and
some include the extra T2X holes.  

    Create rotators have 4 holes but they are in a different spot than the
Hy-Gain ones.  Create has an adapter available to go from their rotator to a
Hy-Gain bolt pattern.  Rohn solves this problem by having slotted holes that
will accept either.

73,  Steve  K7LXC

    TOWER TECH -- professional tower supplies for industry and amateurs

FAQ on WWW:     
Administrative requests:
Sponsored by:             Akorn Access, Inc. & N4VJ / K4AAA

<Prev in Thread] Current Thread [Next in Thread>