[Top] [All Lists]

[TowerTalk] Tuned stubs with RF-1 (for contrast)

To: <>
Subject: [TowerTalk] Tuned stubs with RF-1 (for contrast)
From: (Pete Soper)
Date: Thu, 20 Mar 1997 14:04:19 EST
Hi Guys,
        This is just to show a difference between the MFJ and the Autek. 

        To make 1/4wl open stub with the RF-1 you connect the stub, monitor Z
while tuning until a minimum is found. The cable is now an odd multiple of
1/4 wavelengths long at that frequency (and it would be best if the multiple
is "1" <g>). Calculate the amount of cable to remove to move this minimum to 
the frequency of interest, take off all that you dare, repeat the process 
until done. No dummy load, T connector or extra cable needed.


FAQ on WWW:     
Administrative requests:
Sponsored by:             Akorn Access, Inc. & N4VJ / K4AAA

<Prev in Thread] Current Thread [Next in Thread>