[Top] [All Lists]

[TowerTalk] Hard line connectors

To: <>
Subject: [TowerTalk] Hard line connectors
From: (
Date: Thu, 20 Mar 1997 18:14:35 -0500 (EST)
In a message dated 97-03-20 17:47:36 EST, (Glenn A
Biggerstaff) writes:

> Then you
>  take an empty 38 pistol shell and punch out the primer with a small punch
>  and solder it to the inner conductor .  Take a 3/8 inch piece of #12 or
>  #14 solid copper wire  and put it in the hole where the primer came out
>  and solder it in place. Then  solder a SO 239 panel mount connector to
>  the wire in the  pistol shell.

     This technique recommended for 'big guns' only.

73,  Steve   K7LXC

FAQ on WWW:     
Administrative requests:
Sponsored by:             Akorn Access, Inc. & N4VJ / K4AAA

<Prev in Thread] Current Thread [Next in Thread>