[Top] [All Lists]

[TowerTalk] RE: Using Silicone Grease -Reply

To: <>
Subject: [TowerTalk] RE: Using Silicone Grease -Reply
From: (
Date: Mon, 24 Mar 1997 15:36:11 -0500 (EST)
In looking at the thread, there is one thing I can't visualize.  Do we FILL
UP the inside of the PL-259 with silicone grease, stick in the prepared
RG-8/U cable then wipe off the access that oozes out from the solder holes,
then solder?

Does the silicone grease have any effect on the soldering of the connector?

Harvey, KM4JA

FAQ on WWW:     
Administrative requests:
Sponsored by:             Akorn Access, Inc. & N4VJ / K4AAA

<Prev in Thread] Current Thread [Next in Thread>