Towertalk
[Top] [All Lists]

[TowerTalk] More on soldering...

To: <towertalk@contesting.com>
Subject: [TowerTalk] More on soldering...
From: w2up@Op.Net (Barry Kutner)
Date: Thu, 27 Mar 1997 10:27:10 +0000
As long as we are talking about soldering, here's a related question:

Have you ever had to repair your wire antenna in the field? Either 
the wire breaks (sometimes with the help of my landscaper :.(  ), and 
needs to be soldered back together; or, connection of coax to center 
insulator/wire breaks from too much flapping in the breeze.

I've used my Weller 100/140W gun with success only on warm days with 
little or no wind. When using a Propane torch, the wire seems to 
oxidize before the solder will take, and it just balls up and drips 
on my leg (ouch!) I have been using stranded cooperweld wire, and 
clean it with sandpaper and/or emery cloth prior to soldering. Maybe 
the oxidation between strands is part of the problem?

Be interested in hearing others' experiences... 73 Barry
--
Barry Kutner, W2UP                           Internet: w2up@op.net
Newtown, PA                   FRC            alternate: barry@w2up.wells.com
                                            

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Sponsored by:             Akorn Access, Inc. & N4VJ / K4AAA

<Prev in Thread] Current Thread [Next in Thread>