[Top] [All Lists]

[TowerTalk] Al corrosion/connector seals

To: <>
Subject: [TowerTalk] Al corrosion/connector seals
From: (Bill Hinkle)
Date: Fri, 28 Mar 1997 06:45:14 PST
Also, when you want to remove them the steel center pins tend to make the
drill bit walk and you end up with an egg shaped hole.
                                              Bill, KB3AUG

On Tue, 25 Mar 1997 17:44:06 -0500 writes:
>Just make sure you use pop rivets with an aluminum center pin. The 
>center pins will corrode out in a hurry when outsdie in the weather...
>Stan, WA1ECF     Cape Cod,  MA
>FAQ on WWW:     
>Administrative requests:
>Sponsored by:             Akorn Access, Inc. & N4VJ / K4AAA

FAQ on WWW:     
Administrative requests:
Sponsored by:             Akorn Access, Inc. & N4VJ / K4AAA

<Prev in Thread] Current Thread [Next in Thread>