Towertalk
[Top] [All Lists]

[TowerTalk] Replacing cable on US Tower-LUBE

To: <towertalk@contesting.com>
Subject: [TowerTalk] Replacing cable on US Tower-LUBE
From: k1er@gte.net (John D. Peters)
Date: Sun, 20 Apr 1997 21:19:17 -0700
K7LXC@aol.com wrote:
> 
> In a message dated 97-04-20 09:19:25 EDT, tvickers@bellsouth.net (Tom
> Vickers) writes:
> 
> > >    Other than that, you may want spray a light cable lubricant on the
> cables
> >  >during your semi-yearly inspection.  DO NOT put heavy grease on the
> cables;
> >  >that just traps moisture in the cables.
> >
> >  Can you give the name of of a light cable lub that might be used.
> >
>      Ron Blackbern at TriEx recommends a product called Prelube.  I haven't
> found a source for it yet.
> 
>      Check your yellow pages under rigging shops or wire rope suppliers and
> see what they've got and recommend.  You're looking for a thin cable
> lubricant that will penetrate the cable and doesn't leave a sticky residue on
> the outside that dirt and contaminants will stick to.
> 
>     Heavier greases trap the moisture inside where the rust starts from the
> inside out and by the time you see it, the damage has been done.  Then it's
> REALLY time to change the cables and pulleys.
> 
> 73,  Steve   K7LXC
> 
> --
> FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.comThe stuff Lou Tristao 
> suggested that I use was/is 

Gear & Wire Rope Lubricant, industrial spray, part # 4X595C, stocked by 
Grainger.  Comes in a 12.25 oz spray can,  mfg Dayton Electric Mfg Co, 
Chicago, IL 60648.

73 John K1ER

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com

<Prev in Thread] Current Thread [Next in Thread>