Bill Fisher - W4AN wrote:
> I'm starting on the conversion of my 80M 4-square to Rohn-25 (I'm tired
> of fixing broken wire verticals and ropes everywhere).
> The connection between tower sections... What are ya'll doing there?
> My idea is to use grease (as usual). Are you also using some kind of
> strap at the junctions ? Is it needed?
> Bill, W4AN
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: email@example.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: firstname.lastname@example.orgI HAVE USED 150' OF
> ROHN FOR TEST ANTENNAS FOR AM BROADCAST. I RUN #8
COPPER WIRE DOWN 1 LEG AND BOND IT AT EACH JOINT WITH HOSE CLAMPS. THIS
WAS A TRIED AND PROVEN WAY TO GET A GOOD CONNECTION.
I HAVE A 4 SQ. ON 80 WITH ELEVATED RADIALS MADE OF 25G WORKS GREAT.
73 JOE CLEMENT W6MR
J & J ANTENNS SERVICE
2203 E. MT. VERNON
ORANGE, CA. 92867
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com