> In a message dated 97-04-21 09:14:44 EDT, firstname.lastname@example.org (Bill Fisher -
> W4AN) writes:
>> My idea is to use grease (as usual). Are you also using some kind of
>> strap at the junctions ? Is it needed?
>> Instead of using grease, use an antioxidant; it'll grease the legs AND
>> provide good electrical contact between sections.
>> 73, Steve K7LXC
I always use Penetrox on aluminum, should work on steel too. Ofcourse
a strap between the tower section joints wouldn´t hurt either.
73 de Jim SM2EKM
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com