[Top] [All Lists]

[TowerTalk] Cutting EHS

To: <>
Subject: [TowerTalk] Cutting EHS
From: (
Date: Wed, 23 Apr 1997 15:12:18 PST
  The method I was shown 20 years ago, and have used hundreds of times
since in my communications work involves a good cold chisel (for cutting
steel), and a 15-20 lb piece of steel with a flat side.   Carry them out
to where you're working, and one good swipe with a good hammer will give
you a clean cut.   The weight of the piece on the bottom need to be
sufficient to not move around, and a good quality cold chisel does the
  73's de Stephen, K0SD

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>