John Brosnahan wrote:
> At 03:29 PM 5/2/97 -0600, you wrote:
> >I have discovered that my tower is a Rohn SSV thanks to Bob Locher
> >W9KNI/6 pointing me to ROHN.
> >Rohn is mailing me spec sheets on this model now.
> >Thanks again!
> >Bob K0FR
> Or maybe a Rohn knock off. I have a tower that looks just like a Rohn SSV.
> It was purchased new by AB0I from Alliance Towers, in Nebraska--now defunct.
> Think they took the Rohn book and copied it--but there are very minor
> differences in some areas that give it away. Slightly different sizes and
> thickness for some of the little pieces where the zig-zags attach.
> Didn't review your data enough to see if there was any chance that it
> was a Rohn knock-off, but if you find anything that is slightly different
> then it may be a copy. I presume it will still meet the same specs--this
> info for intellectual curiosity only! HI
> 73 John W0UN
I failed to mention that Rohn confirmed that the part numbers that were
stamped on the tower were their part numbers.
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com